Rebuild and Return Order Form

Rebuild and Return (R&R) Form

- We Rebuild OEM PARTS - If you have an aftermarket part you’d like rebuilt, please contact our office to discuss.
- The R&R Form must be completed in full. One form must be completed for each unit sent.
Please answer the questions below
Has this unit ever been rebuilt before?*
What parts do you want rebuilt?*
- Regulator
- Motor
- Switch
- Other
What parts do you want rebuilt?
If this unit is not re-buildable, do you want it returned?*
Please be sure to include ALL information below.
Year*
Make*
Model*
Window/Door Position*
Part Name*
Please be sure to include ALL information below
Would you like us to insure the part when we return the shipment? Rates vary ($300 worth of insurance costs $5, $600 of insurance costs $8.00, and $1 per $100 extra of insurance after that)*
The part is already insured up to $50. If you would like additional insurance, please specify how much insurance on this part you would like us to purchase (i.e. $300, $500, $1000, etc.)*
Contact Name*
First Last
Phone*
Company Name
Email*
Address:*
Street Address City State ZIP Code
All units are shipped USPS Flat Rate 2-day priority when available or the lowest costs shipping. If you require the use of a different carrier, or would like your part shipped overnight, you must provide a return shipping label or an additional handling charge of $10 will be applied.
If you would like our office to call you prior to shipping to discuss your shipping options, check this box here:
- Please call me
Carrier
- UPS
- FedEx
- USPS
Delivery
- Next Day
- 2 - 3 Days
- Ground
Local Pickup
- Customer Pick Up
How did you hear about us?
If different from the information above
Contact Name
First Last
Phone
Company Name
Email
Address
Street Address Address Line 2 City State / Province / Region ZIP / Postal Code Country
- Please fill out the Rebuild & Return Form completely, and sign the Warranty Disclaimer form – Failure to do so can delay your request.
- Place the completed form in a box and pack the part securely. PLEASE pack your part in the smallest box possible.
- The part must be shipped to our business location listed below:
  Rebuild and Return Services
  Power Window Repair
  2439 East McDowell Road
  Phoenix, AZ 85008
- The complete address must be used when shipping Rebuild and Returns.
NOTE: All shipping costs are the responsibility of the customer. Power Window Repair does not hold any responsibility for delays due to customs issues or packages labeled incorrectly.
- You should have already received the quote for a repair. If not, please call our office before shipping your part.
- All quotes are based on the information received at the time of scheduling. • Prices are subject to change due to missing parts, custom fabrication needs, etc.
- Any changes to a repair or price will be communicated prior to repair.
- If you would also like the motor built in addition to your regulator, please ask our customer service representative if the motor is re-buildable. Pricing will change accordingly.
WARRANTY INFORMATION:
- Your warranty depends on your repair. If you are unsure, please call our office to clarify.
DISCLAIMERS AND WARRANTY SERVICES:
- 90-Day Shipping Fee Warranty: During the first 90 days following the repair, if warranty service is needed, PWR will cover USPS Ground Shipping ONLY. Any additional costs above the cost of USPS Ground Shipping are the customer's responsibility. If a warranty repair occurs after 90 days, shipping charges will be responsible for 100% of shipping costs.
- If the part fails for any reason: If the part was installed by a skilled mechanic, this mechanic MUST have a conversation with our technician BEFORE the part is pulled out of the vehicle for warranty service. PWR WILL NOT BE RESPONSIBLE FOR MECHANIC INSTALLATION ERRORS OR LACK OF KNOWLEDGE ABOUT THE VEHICLE THEY ARE INSTALLING THIS PART IN. PWR is more than happy to assist and guide through installation if needed. If your part is not operating properly upon installation, YOU MUST CALL US IMMEDIATELY to troubleshoot. Motor reset (re-initialization) is not warrantied, i,e, window bouncing. This is a safety feature of your window motor and must be reset by your mechanic. If your part is received unnecessarily for warranty repair, there will be an additional $49 processing charge and customer will be responsible for return shipping.
- THE LABOR ON YOUR VEHICLE IS NOT WARRANTIED – PWR takes no responsibility for any additional labor or storage charges incurred if a part fails during your warranty period.
- If a rebuilt part fails due to the following issues your warranty is void.
  - Installation of regulator is not completed by a trained professional, or knowledgeable individual.
  - Peeling tint is not removed or replaced upon installation within 2 weeks or less.
By checking the box I, acknowledge that I have read and agree to the above listed points.*
- I Read & Agree To The Terms Above

*Having Trouble With The Form? Download & Print The Form

Fax the form to us at 480-383-6330 or email it to powerwindowrepairaz@gmail.com

Follow Us on Social Media

About Power Window Repair

Power Window Repair was founded on the premise that modern cable power window regulators were not only designed to break, but break often. The founder of Power Window Repair used his knowledge and experience in the engineering and automotive sector to design a way to re-manufacture and strengthen the OEM regulator, making it stronger, work like new and at a price that will keep your wallet from screaming for mercy! The most important thing is that the repair is designed and engineered to last for many years to come! We are famous for repairing cable window regulators so they won’t break again.

Rebuild and Return (R&R) Form

Follow Us on Social Media

Quick Links

About Power Window Repair